>
Oil Specification |
1. |
The HFC-134a system requires synthetic (PAG) compressor oil
whereas the R-12 system requires mineral compressor oil. The two oils
must never be mixed. |
2. |
Compressor (PAG) oil varies according to compressor model. Be sure to use oil specified for the model of compressor.
|
1. |
The oil should be free from moisture, dust, metal powder, etc. |
2. |
Do not mix with other oil. |
3. |
The water content in the oil increases when exposed to air.
After use, seal oil from air immediately. (HFC-134a Compressor Oil
absorbs moisture very easily.) |
4. |
The compressor oil must be stored in steel containers, not in plastic containers.
|
Oil total volume in system
PAG OIL : 120 ± 10cc (4.1±0.3oz.) |
1. |
Open all the doors and engine hood. |
2. |
Start the engine and air conditioning switch to "ON" and set the blower motor control knob at its highest position. |
3. |
Run the compressor for more than 20 minutes between 800 and 1,000 rpm in order to operate the system. |
4. |
Stop the engine. |
Description and Operation
Description
The charging system included a battery, an alternator with a built-in regulator, and the charging indicator light and wire.
The Alternator has eight built-in diodes, each rectifying AC ...
Power outlet
The power outlet is designed to provide power for mobile telephones or other
devices designed to operate with vehicle electrical systems. The devices should
draw less than 10 amps with the engin ...
Compressor Description and Operation
Description
The compressor operates in all events except the system air
filling and two solenoid valves (referred to as reverse valve, on-off
control, and normal open) are embedded.
Air dryer ...