>

Hyundai Equus: Components and Components Location - Auto Lighting Control System - Body Electrical System - Hyundai Equus VI 2009-2024 Service ManualHyundai Equus: Components and Components Location

Component Location

1. Auto light sensor
2. Head lamps
3. Lighting switch (Auto)
4. Tail lamps
5. IPM (Instrument Panel Module)

    Specifications
    Specifications ItemsSpecificationsRated voltage5VLoadMax. 1mA (Relay load)Detection illuminationsTail lampON : 74 ± 16 (Lux), 2.36 ± 0.08 (V)OFF : 148 ± 32 (Lux), 4.52 ± 0.1 (V)Head lampON : 18.5 ...

    Description and Operation
    Description In the state of IGN1 ON, when the multi function switch module detects auto light switch on, tail lamp relay output and head lamp low relay output are controlled according to the ve ...

    See also:

    AUX jack Repair procedures
    Removal 1. Remove the floor console upper tray. (Refer to Body - "Floor Console Assembly") 2. Remove the center fascia lower tray. (Refer to Body - "Center fascia pannel") 3. Remove the ...

    Tilting the Sunroof
    To tilt the sunroof open: Push the sunroof control lever upward to the second detent position. To stop the sunroof tilting at any point, operate the control lever. To close the sunroof: Pull ...

    Transmission Oil Temperature Sensor Description and Operation
    Description Transmission oil temperature sensor monitors the automatic Transmission fluid's temperature and conveys the readings to TCM. It is an NTC (Negative Thermal Coefficient) sensor whose ...

    Categories

    Hyundai Equus Manuals


    © 2011-2024 Copyright www.heqmanual.com