The cluster ion generator makes disinfection and
decomposition of bad smell from the air-conditioner or inflow air. And
it cleans the inside air of a vehicle.
When the ignition switch is ON, the generator activates "CLEAN" mode and then "ION" mode, switching between both modes.
In the “CLEAN” mode, the cluster ion generator generates negative ions and positive ions to help clean smells from the air.
In the “ION” mode, the cluster ion generator generates negative ions and cleans inside air of a vehicle.
Inspection
To inspect and diagnose the sensor, refer to Self-Diagnosis procedure and DTC guide.
Replacement
1.
Disconnect the negative (-) battery terminal.
2.
Using a screwdriver or remov ...
Inspection
1.
Press the MODE switch more then 4 times within 2 seconds while pressing the OFF switch.
DisplayFail description00Normal51Cluster ion generator fault
* For diagnostic procedur ...
See also:
Owner maintenance precautions
Improper or incomplete service may result in problems. This section gives instructions
only for the maintenance items that are easy to perform.
As explained earlier in this section, several procedu ...
General Safety Information and Caution
Smart Cruise Control
Be careful when driving the vehicle using the smart cruise control system as follows.
•
The smart cruise control system may have limits to detect dist ...
Telemetics Unit (TMU) Repair procedures
Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the front AVN monitor.
(Refer to "Premium AVN System")
3.
Remove the MTS unit after loosening the screw and nuts.
4.
...