>
Hyundai Equus Manuals

Hyundai Equus: Cluster Fascia Panel Repair procedures - Crash Pad - Body (Interior and Exterior) - Hyundai Equus VI 2009-2024 Service ManualHyundai Equus: Cluster Fascia Panel Repair procedures

Second generation VI (2009–2024) / Hyundai Equus VI 2009-2024 Service Manual / Body (Interior and Exterior) / Crash Pad / Cluster Fascia Panel Repair procedures

Replacement
   
•
Put on gloves to protect your hands.
   
•
When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
•
Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface.
•
Take care not to bend or scratch the trim and panels.
1.
Using a screwdriver or remover, remove the center fascia upper panel (A).

2.
Install in the reverse order of removal.
   
•
Replace any damage clips.
    Cluster Fascia Panel Components and Components Location
    Component Location 1. Cluster fascia panel ...

    Center Fascia Panel Components and Components Location
    Component Location 1. Center fascia upper panel2. Center fascia lower panel ...

    See also:

    Components and Components Location
    Component Location ...

    Components and Components Location
    Components Location 1. Fuel tank2. Fuel pump3. Sub fuel sender4. Fuel filter5. Over Pressure Valve (OPV)6. Canister7. Fuel tank air filter8. Fuel Pressure Sensor (FPS)9. Fuel Level Sensor ( ...

    Positive Crankcase Ventilation (PCV) Valve Repair procedures
    Removal 1. Disconnect the vapor hose (A). 2. Remove the PCV valve (B). Inspection 1. Insert a thin stick (A) into the PCV valve (B) from the threaded side to check that the plunger moves ...

    Categories

    Hyundai Equus Manuals


    © 2011-2024 Copyright www.heqmanual.com