>
Replacement |
1. |
Remove the stopper (B) from the glove box (A). |
2. |
Disconnect the air damper (A) from the glove box (B). |
3. |
Remove the filter cover (A) by pressing the knob. |
4. |
Replace the air filter (B) with a new one according to the direction of air filter.
|
Trunk Lid Back Panel Repair procedures
Replacement
•
Put on gloves to protect your hands.
•
When prying with a flat-tip screwdriver, wrap it with
protective tape, and apply prote ...
Compressor Description and Operation
Description
The compressor operates in all events except the system air
filling and two solenoid valves (referred to as reverse valve, on-off
control, and normal open) are embedded.
Air dryer ...
Repair procedures
On-vehicle Inpection
•
First of all, check for DTCs. If a DTC is present, perform
troubleshooting in accordance with the procedure for that DTC. (Refer to
DTC guide)
...