Hyundai Equus: Charging System
- Description and Operation
- Repair procedures
- Alternator Description and Operation
- Alternator Specifications
- Alternator Schematic Diagrams
- Alternator Repair procedures
- Battery Description and Operation
- Battery Specifications
- Battery Repair procedures
- Battery Troubleshooting
- Battery Sensor Description and Operation
- Battery Sensor Repair procedures
Spark Plug Repair procedures
Inspection
[On vehicle inspection]
1.
Accelerate the engine to about 3,000 rpm 3 times or more.
2.
Remove the spark plug.
3.
Check the spark plug visually.
If the electrode is dry, the ...
Description and Operation
Description
The charging system included a battery, an alternator with a built-in regulator, and the charging indicator light and wire.
The Alternator has eight built-in diodes, each rectifying AC ...
See also:
Schematic Diagrams
Circuit Diagram
NO.Function1BAT.2IGN3CAN_High4CAN_Low5GND6-
...
Fuel Tank Repair procedures
Removal
1.
Release the residual pressure in fuel line.
(Refer to Fuel Delivery System - "Release Residual Pressure in Fuel Line")
2.
Turn the ignition switch OFF and disconnect the negative ...
Rear Variable Damper Schematic Diagrams
Circuit Diagram
1.
Rear variable damper connector
2.
Rear variable damper terminal function
TerminalFunction1Variable damper (-)2Variable damper (+)
3.
Circuit diagram ...
Categories
Hyundai Equus Manuals
© 2011-2026 Copyright www.heqmanual.com