Camshaft Position Sensor (CMPS) is a hall sensor and detects the camshaft position by using a hall element.
It is related with Crankshaft Position Sensor (CKPS) and
detects the piston position of each cylinder which the CKPS can't
detect.
The CMPS is installed on engine head cover and uses a target
wheel installed on the camshaft. The Cam Position sensor is a
hall-effect type sensor. As the target wheel passes the Hall sensor, the
magnetic field changes in the sensor. The sensor then switches a signal
which creates a square wave.
Inspection
1.
Check signal waveform of CKPS and CMPS using a GDS.
Specification: Refer to “Waveform”
Removal
1.
Turn the ignition switch OFF and disconnect the battery negative (-) cab ...
Specification
ItemSpecificationOutput Voltage (V)High : 5.0VLow : 0.7VAir Gap (mm)0.2 ~ 2.0
...
See also:
Front Door Trim Repair procedures
Replacement
•
Put on gloves to protect your hands.
•
When prying with a flat-tip screwdriver, wrap it with
protective tape, and apply prote ...
Front Air Strut Assembly Schematic Diagrams
Circuit Diagram
1.
Front air strut connector
2.
Front air terminal function
TerminalFunction1Variable damper (-)2Variable damper (+)
3.
Circuit diagram ...
Mechanical Key
If the Smart Key does not operate normally, you can lock or unlock the door by
using the mechanical key.
Mechanical Key of Conventional Smart Key
Depress and hold the release button (1) and re ...