>
Removal |
1. |
Remove the lower crash pad.
(Refer to Body - "Crash Pad") |
2. |
Disconnect the stop lamp switch connector (A). |
3. |
Remove the mounting bracket nut (B).
|
4. |
Remove the snap pin (A) and clevis pin (B). |
5. |
Remove the brake pedal member assembly mounting nuts (C) and then remove the brake pedal assembly.
|
Inspection |
1. |
Check the bushing for wear. |
2. |
Check the brake pedal for bending or twisting. |
3. |
Check the brake pedal return spring for damage. |
4. |
Check the stop lamp switch.
|
Master Cylinder Components and Components Location
Components
1. Reservoir cap2. Reservoir3. Grommet4. Cylinder pin5. Retainer6. Primary piston assembly7. Secondary piston assembly8. Master cylinder body
...
Specifications
Specifications
ContentValueAFLSNominal VoltageDC 13.5VMax VoltageDC 18.5VRated VoltageDC 10~16VOperating Temperature-40°C ~ +85°COperating CurrentMAX. 200mA
...
Rear Seat Belt Retractor Components and Components Location
Component Location
1. Rear seat belt retractor
...