>
Removal |
1. |
Remove the wheel & tire. |
2. |
Remove the brake hose clip (A).
Front
Rear |
3. |
Disconnect the brake tube by loosening the tube flare nut.
|
4. |
Disconnect the brake hose from the brake caliper by loosening
the bolt. And loosen the braket bolt for disconnect the brake line.
Front
Rear |
Inspection |
1. |
Check the brake tubes for cracks, crimps and corrosion. |
2. |
Check the brake hoses for cracks, damage and fluid leakage. |
3. |
Check the brake tube flare nuts for damage and fluid leakage. |
4. |
Check the brake hose mounting bracket for crack or deformation. |
Installation |
1. |
Installation is the reverse of removal.
|
2. |
After installation, bleed the brake system.
(Refer to Brake System - "Brake System Bleeding") |
3. |
Check the spilled brake oil. |
Driver Airbag (DAB) Module and Clock Spring Repair procedures
Removal
1.
Disconnect the battery negative cable and wait for at least three minutes before beginning work.
2.
Loosen the airbag module mounting bolts (2EA).
3.
Remove the wiring fixing c ...
Smart Key Repair procedures
Smart Key
Battery Inspection
1.
Check that the red light flickers when the door lock or unlock button is pressed on the transmitter.
2.
Remove the battery (A) and check voltage if the red lig ...
Driving off-road
Drive carefully off-road because your vehicle may be damaged by rocks or roots
of trees. Become familiar with the off-road conditions where you are going to drive
before you begin driving. ...