>
Hyundai Equus: Body (Interior and Exterior)
Steering Angle Sensor Description and OperationSRS Control Module (SRSCM) Repair procedures
Removal
1.
Turn the engine OFF.
2.
Disconnect the battery negative cable and wait for at least three minutes before beginning work.
3.
Remove the floor console assembly.
(Refer to Body - ...
Fuel Line Repair procedures
Removal
1.
Turn ignition switch OFF and disconnect the negative (-)battery cable.
2.
Release the residual pressure in fuel line.
(Refer to Fuel Delivery System - "Release Residual Pressure in ...
Detecting sensor
The sensors are located inside of the rear bumper.
Always keep the rear bumper clean for the system to work properly. ...