Hyundai Equus: Blind Spot Detection Switch Components and Components Location

Blind Spot Detection Unit Repair procedures

Removal Blind spot detection (BSD) unit 1. Disconnect the negative (-) battery.     Be careful when removing the blind spot detection unit. The bracket may break off from the b ...

Blind Spot Detection Switch Repair procedures

Removal 1. Disconnect the negative (-) battery. 2. Remove the crash pad lower panel (A). (Refer to Body - "Crash Pad Lower Panel") 3. Remove the crash pad lower panel and then push the bl ...

See also:

Transmission Control Module (TCM) Repair procedures
Inspection TCM Problem Inspection Procedure 1. TEST TCM GROUND CIRCUIT: Measure resistance between TCM and chassis ground using the backside of TCM harness connector as TCM side check poin ...

Description and Operation
Description In the state of IGN1 ON, when the multi function switch module detects auto light switch on, tail lamp relay output and head lamp low relay output are controlled according to the ve ...

Components and Components Location
Component Location ...