>
Removal |
1. |
Disconnect the battery negative (-) cable. |
2. |
Disconnect the battery sensor connector (A). |
3. |
Remove the battery negative (-) cable after removing the bolts (B). |
Installation |
1. |
Install in the reverse order of removal.
|
Repair procedures
Adjustment
1.
After loosening the hinge (A) mounting bolt, adjust the hood (B) by moving it up or down, or right or left.
2.
Adjust the hood height by turning the hood overslam bumpers (C).
...
Automatic heating and air conditioning
1. Press the AUTO button.
The modes, fan speeds, air intake and air-conditioning will be controlled automatically
according to the temperature setting.
2. Press the TEMP button to set the desi ...
Rear Wheel House Trim Components and Components Location
Component Location
1. Rear wheel house trim
...