>
If the Smart Key is not working properly, try replacing the battery with a new one.
Battery Replacement of Conventional Smart Key
Battery Type: CR2032 To Replace the Battery:
1. Pry open the rear cover of the Smart Key.
2. Remove the old battery and insert the new battery. Make sure the battery position
is correct.
3. Reinstall the rear cover of the Smart Key.
Battery Replacement of Card Type Smart Key
Battery Type: CR2412 To Replace the Battery:
1. Pull out the battery and battery cover.
2. Remove the old battery and insert the new battery. Make sure the battery position
is correct.
3. Reinstall the battery cover and battery.
✽ NOTICE
Rear Wheel House Trim Components and Components Location
Component Location
1. Rear wheel house trim
...
Line Pressure Control Solenoid Vale Specifications
Specifications
Line Pressure Control VFS
x Control type : Normal high type
Control Pressure kpa (kgf/cmx, psi)0~500.14 (0~5.1,0~72.54)Current value(mA)0~850 Internal resistance ...
Repair procedures
Removal
Front Blind Camera
1.
Remove the front bumper cover.
(Refer to Body - "Front Bumper")
2.
Remove the front blind camera (B) after removing the connector (A) and screws (4EA).
Back ...