>
Replacement |
|
|
1. |
Using a screwdriver or remover, remove the B pillar upper garnish (A). |
2. |
Disconnect the rubber (A) screw loose. |
3. |
Install in the reverse order of removal.
|
|
|
1. |
Remove the canter pillar lower trim.
(Refer to Interior Trim - "Center Pillar Trim") |
2. |
Using a screwdriver or remover, remove the B pillar upper garnish (A). |
3. |
Disconnect the rubber (A) screw loose. |
4. |
Loosen the mounting nuts, remove the B pillar lower garnish (A). |
5. |
Install in the reverse order of removal.
|
Driver Airbag (DAB) Module and Clock Spring Description and Operation
Description
The Driver Airbag (DAB) is installed in the steering wheel
and electrically connected to SRSCM via the clock spring. It protects
the driver by deploying the airbag when frontal cras ...
Components and Components Location
Component Location
...
Assist Door Module (ADM) Description and Operation
Description
1.
Assist Door Module (ADM)
(1)
Main features
ItemExplanationNotesInstallation location Passenger side door trimComponent configuration
1.
Embedded with CAN Communication IC
...