Hyundai Equus: Automatic Transmission Components and Components Location
Second generation VI (2009–2024) / Hyundai Equus VI 2009-2024 Service Manual / Automatic Transmission System (SBC) / Automatic Transmission System / Automatic Transmission Components and Components Location
Second generation VI (2009–2024) / Hyundai Equus VI 2009-2024 Service Manual / Automatic Transmission System (SBC) / Automatic Transmission System / Automatic Transmission Components and Components Location
| Components Location |
| 1. Automatic transmission case 2. Inhibitor switch 3. Manual control lever 4. Shift cable bracket 5. Oil injection hole 6. Air breather hose & pipe | 7. Oil injection hole (in factory) 8. E Module connector 9. Support bracket 10. Check plug 11. Oil cooler port |
Repair procedures
EOL Input
Description
When shift shock is occurred or parts related with the transmission are replaced, EOL should be performed.
In the following case, EOL is required.
•
Transmission assem ...
Automatic Transmission Repair procedures
Removal
1.
Disconnect (-) terminal from the battery.
The battery is placed right side of the temporary tire in the trunk.
2.
Remove the under cover (A).
3.
Remove ...
See also:
Front Door Inside Handle Repair procedures
Replacement
1.
Remove the front door trim.
(Refer to Front Door - "Front Door Trim")
2.
Disconnect the front door inside handle lamp connector (A).
3.
After loosening the mounting screws ...
Smart Key Unit Schematic Diagrams
Circuit Diagram
...
Fuel Pressure Sensor (FPS) Troubleshooting
Fail-Safe Mode
ItemFail-SafeDuty (%)85
If the fuel pressure sensor malfunctions, it enters fail safe
mode. This means that the fuel pressure rises to match the increasi ...
Categories
Hyundai Equus Manuals
© 2011-2024 Copyright www.heqmanual.com