>
Inspection |
Replacement |
1. |
Disconnect the negative (-) battery terminal. |
2. |
Using a screwdriver or remover, remove the inside rearview mirror cover (A). |
3. |
Disconnect the connector (A) and then remove the auto defogging sensor (B). |
4. |
Install in the reverse order of removal. |
Solenoid Valve Components and Components Location
Components
1. Connected to air tube2. Bracket3. Connector
...
Front / Rear Parking Assist System Control Unit Repair procedures
Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the BCM unit.
(Refer to Body Control Module - "Body Control Module")
Installation
1.
Install the BCM unit.
2.
Conne ...
Description and Operation
Description
The BSD (Blind Spot Detection) system uses a radar sensor to alert the driver while driving.
It senses the rear side territory of the vehicle and provides information to the driver.
- ...