>

Hyundai Equus: Ambient Temperature Sensor Description and Operation - Air Conditioning System - Heating, Ventilation and Air Conditioning - Hyundai Equus VI 2009-2024 Service ManualHyundai Equus: Ambient Temperature Sensor Description and Operation

Description
The ambient temperature sensor is located at the front of the condenser and detects ambient air temperature. It is a negative type thermistor; resistance will increase with lower temperature, and decrease with higher temperature.
The sensor output will be used for discharge temperature control, temperature regulation door control, blower motor level control, mix mode control and in-car humidity control.
   
If the ambient temperature is below 1.0°C (33.8°F), the A/C compressor will stop.
The compressor will operate manually.
    Photo Sensor Repair procedures
    Inspection 1. Turn the ignition switch ON. 2. Connect the GDS. 3. Emit intensive light toward the photo sensor using a lamp, and check the output voltage change. 4. The voltage will ri ...

    Ambient Temperature Sensor Repair procedures
    Inspection 1. Turn the ignition switch OFF. 2. Remove the front bumper. (Refer to Body - "Front Bumper Cover") 3. Disconnect ambient temperature sensor. 4. Check the resistance of the ...

    See also:

    Headlight
    When the headlight(light switch in the headlight or AUTO position) is on and all doors (and trunk) are locked and closed, the position light and headlight will come on for 15 seconds if any of the ...

    Driver Airbag (DAB) Module and Clock Spring Components and Components Location
    Components 1. Driver Airbag (DAB)2. Steering Wheel3. Clock Spring ...

    Center Pillar Trim Components and Components Location
    Component Location 1. Center pillar lower trim2.Center pillar upper trim ...

    Categories

    Hyundai Equus Manuals


    © 2011-2024 Copyright www.heqmanual.com