>
Desciption |
Hazard Lamp Switch Repair procedures
Inspection
1.
Check "IPM" input/output specification of hazard lamp switch
using the GDS. If the specification is abnormal, replace the hazard
switch module.
2.
Select option "Input/output ...
Opening the Fuel Filler Lid
1. Turn the engine off.
2. Push the fuel filler lid opener button located on the driver’s door. Then the
fuel filler lid slowly open (1).
3. To remove the fuel tank cap (2), turn it counterclock ...
High mounted stop light
1. Remove the rear seat
5 Seater
1.Disconnect the negative battery cable.
2.Remove the rear seat cushion.
3.Loosen the mounting bolts, then remove the rear seat back.
4.Disconnect the conne ...