>
Removal |
|
1. |
Remove the air cleaner assembly.
(Refer to Engine Mechanical System - "Exhaust Manifold") |
2. |
Disconnect the air tube (A) and remove nut (B-3ea).
|
3. |
Install in the reverse order of removal. |
Fuel Pressure Sensor (FPS) Troubleshooting
Fail-Safe Mode
ItemFail-SafeDuty (%)85
If the fuel pressure sensor malfunctions, it enters fail safe
mode. This means that the fuel pressure rises to match the increasi ...
Receiver-Drier Repair procedures
Replacement
1.
Remove the condenser.
2.
Remove the cap (B) on the bottom of the condenser with a L wrench (A).
Tightening torque :
2.7 ~ 3.1 N.m (0.28 ~ 0.32 kgf.m, 2.0 ~ 2.3 lb-ft)
...
Head Up Display Unit Components and Components Location
Component
...