>
Removal |
1. |
Disconnect the negative (-) battery terminal. |
2. |
Remove the glove box housing (A). (Refer to the Body group - "Crash pad") |
3. |
Disconnect the glove box housing connector (A). |
4. |
Remove the DIS head unit. (Refer to DIS system) |
5. |
Remove the USB interface unit. |
6. |
Remove the front/rear parking assist system unit. (Refer to Front/Rear Parking assist system) |
7. |
Remove the AFLS unit(A) after removing connector and nuts(2EA). |
Installation |
1. |
Install the AFLS unit after connecting the connector. |
2. |
Install the front/rear parking assist system unit. |
3. |
Install the USB interface unit. |
4. |
Install the DIS head unit. |
5. |
Install the glove box housing. |
6. |
Connect the negative (-) battery terminal. |
Headlight
When the headlight(light switch in the headlight or AUTO position) is on and
all doors (and trunk) are locked and closed, the position light and headlight will
come on for 15 seconds if any of the ...
8LR Brake Control Solenoid Valve Schematic Diagrams
Circuit Diagram
...
Fuel Pressure Control Valve Troubleshooting
Signal Waveform
...