>

Hyundai Equus: 8LR Brake Control Solenoid Valve Description and Operation - Automatic Transmission Control System - Automatic Transmission System (SBC) - Hyundai Equus VI 2009-2024 Service ManualHyundai Equus: 8LR Brake Control Solenoid Valve Description and Operation

Description
8LR Brake control solenoid valve is attached to the valve body. This variable force solenoid valve directly controls the hydraulic pressure inside the 8LR Brake.

    Underdrive Brake Control Solenoid Valve(UD/B_VFS) Repair procedures
    Inspection 1. Turn ignition switch OFF. 2. Disconnect the E Module connector. 3. Measure resistance between sensor signal terminal and sensor ground terminal. 4. Check that the res ...

    8LR Brake Control Solenoid Valve Specifications
    Specifications Direct control VFS[8LR/B] x Control Type : Normal low type Control Pressure kpa (kgf/cmx, psi)0 ~ 2108.42(0 ~ 21.5, 0 ~ 305.80)Current value(mA)0~1100 Internal r ...

    See also:

    Description and Operation
    Description Communication Network Diagram AbbreviationExplanationC_CANChassis Controller Area NetworkB_CANBody Controller Area NetworkMM_CANMulti media Controller Area NetworkSMKSmart Key UnitDD ...

    Fuel Filler Door Release Actuator Repair procedures
    Inspection 1. Remove the trunk room left side trim. 2. Open the fuel filler door and remove the housing. (Refer to the BD group - "Exterior")     Do not reuse the fuel fill ...

    Air Quality Sensor (AQS) Repair procedures
    Inspection 1. Turn the ignition switch OFF. 2. Connect the GDS. 3. Check the output voltage of AQS between terminal 2 and 3. 1. DC 12V( Ignition)2. Sensor ground3. AQS signal Specif ...

    Categories

    Hyundai Equus Manuals


    © 2011-2024 Copyright www.heqmanual.com