>

Hyundai Equus: 4&OD Clutch Control Solenoid Valve Description and Operation - Automatic Transmission Control System - Automatic Transmission System (SBC) - Hyundai Equus VI 2009-2024 Service ManualHyundai Equus: 4&OD Clutch Control Solenoid Valve Description and Operation

Description
4&OD Clutch control solenoid valve is attached to the valve body. This variable force solenoid valve directly controls the hydraulic pressure inside the 4&OD Clutch.

    6 Speed Clutch Control Solenoid Valve Repair procedures
    Inspection 1. Turn ignition switch OFF. 2. Disconnect the E Module connector. 3. Measure resistance between sensor signal terminal and sensor ground terminal. 4. Check that the res ...

    4&OD Clutch Control Solenoid Valve Specifications
    Specifications Direct control VFS[4&OD/C] x Control type : Normal high type Control Pressure kpa (kgf/cmx, psi)0~1569.06 (0~16,0~227.57)Current value(mA)0~1100 Internal resistanc ...

    See also:

    Cleaning the interior  window glass
    If the interior glass surfaces of the vehicle become fogged (that is, covered with an oily, greasy or waxy film), they should be cleaned with glass cleaner. Follow the directions on the glass clea ...

    Restrictions in Handling Keys
    When leaving keys with parking lot and valet attendants, the following procedures will ensure your vehicle’s trunk and glove box compartment can only be opened with the mechanical key. To loc ...

    Drive shafts and boots
    Check the drive shafts, boots and clamps for cracks, deterioration, or damage. Replace any damaged parts and, if necessary, repack the grease. ...

    Categories

    Hyundai Equus Manuals


    © 2011-2024 Copyright www.heqmanual.com