>

Hyundai Equus: 27 Brake Control Solenoid Valve Description and Operation - Automatic Transmission Control System - Automatic Transmission System (SBC) - Hyundai Equus VI 2009-2024 Service ManualHyundai Equus: 27 Brake Control Solenoid Valve Description and Operation

Description
27 Brake control solenoid valve is attached to the valve body. This variable force solenoid valve directly controls the hydraulic pressure inside the 27 Brake.

    35R Clutch Control Solenoid Valve(35R/C_VFS) Repair procedures
    Inspection 1. Turn ignition switch OFF. 2. Disconnect the E Module connector. 3. Measure resistance between sensor signal terminal and sensor ground terminal. 4. Check that the res ...

    27 Brake Control Solenoid Valve Specifications
    Specifications Direct control VFS[27/B] x Control type : Normal low type Control Pressure kpa (kgf/cmx, psi)0~1569.06 (0~16,0~227.57)Current value(mA)0~1100 Internal resistance ...

    See also:

    Severe driving conditions
    A - Repeatedly driving short distance of less than 5 miles (8 km) in normal temperature or less than 10 miles (16 km) in freezing temperature B - Extensive engine idling or low speed driving for lo ...

    Rear Door Side Curtain Schematic Diagrams
    Circuit Diagram ...

    Automatic-dimming function
    Your mirror will automatically dim upon detecting glare from the vehicles traveling behind you. The autodimming function can be controlled by the Dimming ON/OFF Button: 1. Pressing the button turn ...

    Categories

    Hyundai Equus Manuals


    © 2011-2024 Copyright www.heqmanual.com