>
Replacement |
|
|
1. |
After loosening the mounting clips, then remove the front door frame inner cover (A). |
2. |
Disconnect the outside rear view mirror connector (A). |
3. |
After loosening the mounting bolts, then remove the outside rear view mirror (B).
|
4. |
Install in the reverse order of removal.
|
Accelerator Position Sensor (APS) Schematic Diagrams
Circuit Diagram
...
Specifications
Specifications
ItemSpecificationMaster cylinderTypeTandemCylinder I.D.25.4mm (1.00in)Piston stroke35±1mm (1.38in)Fluid level switchProvidedBrake boosterType8" + 9" TandemBoosting ratio9 : 1Front ...
High Pressure Fuel Pump Repair procedures
Removal
In case of removing the high pressure fuel pump, high
pressure fuel pipe, delivery pipe, and injector, there may be injury
caused by leakage of the high pressure f ...