>

Hyundai Equus: Middle Speed Sensor Specifications - Automatic Transmission Control System - Automatic Transmission System (SBC) - Hyundai Equus VI 2009-2026 Service ManualHyundai Equus: Middle Speed Sensor Specifications

Specifications
x Type: Hall effect sensor
x Specifications
Operation condition (°C)°F
((-)40~150))
-40~302
Air gap(mm)in.
1.3(0.0512)
Output voltage(V)
High
1.4
Low
0.7

    Middle Speed Sensor Description and Operation
    Description The middle speed sensor measures the rate of rotation of the 6C outer drum inside the transmission and delivers the readings to the TCM. ...

    Middle Speed Sensor Schematic Diagrams
    Circuit Diagram ...

    See also:

    Tire replacement
    If the tire is worn evenly, a tread wear indicator will appear as a solid band across the tread. This shows there is less than 1/16 inch (1.6 mm) of tread left on the tire. Replace the tire when ...

    Rear Seat Belt Retractor Repair procedures
    Replacement     • When installing the belt, make sure not to damage the retractor. 1. Remove the rear package tray trim. (Refer to Interior Trim - "Rear Package Tray ...

    Line Pressure Control Solenoid Vale Specifications
    Specifications Line Pressure Control VFS x Control type : Normal high type Control Pressure kpa (kgf/cmx, psi)0~500.14 (0~5.1,0~72.54)Current value(mA)0~850 Internal resistance ...

    Categories

    Hyundai Equus Manuals

    © 2011-2026 Copyright www.heqmanual.com