Hyundai Equus: Opening the Hood

Hood

...

Closing the hood

1. Before closing the hood, check the following: All filler caps in engine compartment must be correctly installed. Gloves, rags or any other combustible material must be removed from the eng ...

See also:

Components and Components Location
Component Location 1. Slide motor2. Front Height motor3. Rear Height motor4. Recline motor5. Headrest motor6. Cushion extension motor7. Air lumbar support switch8. Air lumbar support pump9. Air l ...

Specifications
Specifications Smart Key Unit ItemsSpecificationRated voltageDC 12VOperating voltageDC 9 ~ 16VOperating temperature-22°F ~ 167°F (-30°C ~ 75°C)LoadMax. 2.5 mA (When welcome function 3.7 mA) ...

Intake Actuator Description and Operation
Description The intake actuator is located at the blower unit. It regulates the intake door by a signal from the control unit. Pressing the intake selection switch will shift between recirculat ...