Hyundai Equus: Rail Pressure Sensor (RPS) Schematic Diagrams

Rail Pressure Sensor (RPS) Troubleshooting

Signal Waveform ...

Rail Pressure Sensor (RPS) Repair procedures

Inspection 1. Connect the GDS on the Data Link Connector (DLC). 2. Measure the output voltage of the RPS at idle and various engine speed. ConditionOutput Voltage (V)Idle Approx. 1.21, ...

See also:

Starter Components and Components Location
Components 1. Front bracket2. Planet gear shaft assembly3. Lever4. Lever packing5. Magnet switch6. Through bolt7. Planet gear 8. Shield9. Armature assembly10. York assembly11. Brush holder assemb ...

Troubleshooting
Troubleshooting     1. After replacing multi-view camera unit, always check that the system operates properly. 2. If the failure persists after replacing the multi-view camer ...

Smooth cornering
Avoid braking or gear changing in corners, especially when roads are wet. Ideally, corners should always be taken under gentle acceleration. If you follow these suggestions, tire wear will be ...