>

Hyundai Equus: Special Service Tools - General Information - Engine Mechanical System - Hyundai Equus VI 2009-2024 Service ManualHyundai Equus: Special Service Tools

Special Service Tools
Tool (Number and name)
Illustration
Use
Crankshaft front oil seal installer
(09231-2J310)
(09231-H1100)

Installation of the front oil seal
Ring gear stopper
(09231-2B100)
(09231-3N100)

Removal and installation of the crankshaft pulley
Torque angle adapter
(09221-4A000)

Installation of bolts & nuts needing an angular method
Valve stem seal installer
(09222-28200)

Installation of the valve stem seal
Valve spring compressor & holder
(09222-3K000)
(09222-3C310)

Removal and installation of the intake or exhaust valves
A : 09222-3K000
B : 09222-3C310 (holder)
Crankshaft rear oil seal installer
(09231-2J400)
(09231-H1100)

Installation of the crankshaft rear oil seal
Oil pan remover
(09215-3C000)

Removal of oil pan
Oil seal installer
(09231-2J510)
(09231-H1100)

Installation of the cylinder head cover oil seal & timing chain upper cover oil seal.
Timing chain locking tool
(09231-2J600)

Holds the timing chain with timing chain guide & timing chain tensioner arm during installation.

    Troubleshooting
    Troubleshooting SymptomSuspect areaRemedyEngine misfire with abnormal internal lower engine noises.Worn crankshaft bearings.Loose or damaged engine drive plate.Replace the crankshaft and bearings ...

    Engine And Transmission Assembly
    ...

    See also:

    BlueLink Control Switch Repair procedures
    Removal 1. Remove the Electro chromic Inside rear view mirror. (Refer to Electro Chromic Inside Rear View Mirror) Installation 1. Install the Electro chromic Inside rear view mirror. (Refer ...

    Crankshaft Position Sensor (CKPS) Repair procedures
    Inspection 1. Check signal waveform of CKPS and CMPS using a GDS. Specification: Refer to “Waveform” Removal 1. Turn the ignition switch OFF and disconnect the battery negative (-) cab ...

    Front Disc Brake Repair procedures
    Removal 1. Remove the front wheel & tire. Tightening torque : 88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft) 2. Remove the brake hose mounting bracket. (Knuckle mounting pa ...

    Categories

    Hyundai Equus Manuals


    © 2011-2024 Copyright www.heqmanual.com