Hyundai Equus: Emergency starting
Second generation VI (2009–2026) / Hyundai Equus 2009-2026 Owners Manual / What to do in an emergency / Emergency starting
Connect cables in numerical order and disconnect in reverse order.
✽ NOTICE
Your vehicle has a battery in the trunk compartment, but when you jump start your vehicle, use the jumper terminal in the engine compartment.
If engine turns over normally but does not start
1. Check fuel level.
2. With the Engine Start/Stop Button in the OFF position, check all connectors at
ignition coils and spark plugs. Reconnect any that may be disconnected or loose.
3. If the en ...
Jump starting
Jump starting can be dangerous if done incorrectly. Therefore, to avoid harm
to yourself or damage to your vehicle or battery, follow the jump starting procedures.
If in doubt, we strongly recomme ...
See also:
Damper Clutch Control Solenoid Valve Repair procedures
Inspection
1.
Turn ignition switch OFF.
2.
Disconnect the E Module connector.
3.
Measure resistance between sensor signal terminal and sensor ground terminal.
4.
Check that the resi ...
Seat Belt Buckle Switch (BS) Repair procedures
Removal
1.
Disconnect the battery negative cable, and wait for at least three minutes before beginning work.
2.
Remove the front seat assembly.
(Refer to Body - "Front Seat Assembly")
3.
...
Components and Components Location
Component Location
1. Slide motor2. Front Height motor3. Rear Height motor4. Recline motor5. Headrest motor6. Cushion extension motor7. Air lumbar support switch8. Air lumbar support pump9. Air l ...
Categories
Hyundai Equus Manuals
