Hyundai Equus: Vehicle weight
Second generation VI (2009–2026) / Hyundai Equus 2009-2026 Owners Manual / Driving your vehicle / Vehicle weight
This section will guide you in the proper loading of your vehicle, to keep your loaded vehicle weight within its design rating capability.
Properly loading your vehicle will provide maximum return of the vehicle design performance. Before loading your vehicle, familiarize yourself with the following terms for determining your vehicle's weight ratings, from the vehicle's specifications and the certification label:
- Base curb weight
- Vehicle curb weight
- Cargo weight
- GAW (Gross axle weight)
- GAWR (Gross axle weight rating)
- GVW (Gross vehicle weight)
- GVWR (Gross vehicle weight rating)
Certification label
The certification label is located on the driver's door sill at the center pillar.
This label shows the maximum allowable weight of the fully loaded vehicle. This
is called the GVWR (Gross ...
Base curb weight
This is the weight of the vehicle including a full tank of fuel and all standard
equipment. It does not include passengers, cargo, or optional equipment. ...
See also:
Specifications
Specifications
ItemsSpecificationsRated voltage5VLoadMax. 1mA (Relay load)Detection illuminationsTail lampON : 74 ± 16 (Lux), 2.36 ± 0.08 (V)OFF : 148 ± 32 (Lux), 4.52 ± 0.1 (V)Head lampON : ...
Starter Components and Components Location
Components
1. Front bracket2. Planet gear shaft assembly3. Lever4. Lever packing5. Magnet switch6. Through bolt7. Planet gear 8. Shield9. Armature assembly10. York assembly11. Brush holder assemb ...
Rear Wheel Speed Sensor Repair procedures
Removal
1.
Remove the rear wheel speed sensor mounting bolt.
Tightening torque:
6.9 ~ 10.8 Nm (0.7 ~ 1.1 kgf.m, 5.1~ 8.0 lb-ft)
2.
Remove the rear wheel guard.
3.
Disconnect the rea ...
Categories
Hyundai Equus Manuals
