>
Replacement |
1. |
Remove the stopper (B) from the glove box (A). |
2. |
Disconnect the air damper (A) from the glove box (B). |
3. |
Remove the filter cover (A) by pressing the knob. |
4. |
Replace the air filter (B) with a new one according to the direction of air filter.
|
Injector Specifications
Specification
ItemSpecificationCoil Resistance (x)1.08 ~ 1.23 [23°C(73.4°F)]
...
Middle Speed Sensor Repair procedures
Inspection
1.
Check signal waveform of middle speed sensor using the GDS.
Specification: Refer to "Signal Wave Form" section.
...
Repair procedures
On-vehicle Inpection
•
First of all, check for DTCs. If a DTC is present, perform
troubleshooting in accordance with the procedure for that DTC. (Refer to
DTC guide)
...