>
On the LCD display, you can change the head up display settings as follows.
1. Display height
2. Illumination
3. Font color
4. Font size
5. Contents setting
Rear LCD monitor Components and Components Location
Components
...
Tire and loading information label
The label located on the driver's door sill gives the original tire size, cold
tire pressures recommended for your vehicle, the number of people that can be in
your vehicle and vehicle cap ...
Line Pressure Control Solenoid Vale Repair procedures
Inspection
1.
Turn ignition switch OFF.
2.
Disconnect the E Module connector.
3.
Measure resistance between sensor signal terminal and sensor ground terminal.
4.
Check that the res ...