Evaporative Emission Control System prevents fuel vapor
stored in fuel tank from vaporizing into the atmosphere. When the fuel
evaporates in the fuel tank, the vapor passes through vent hoses or
tubes to canister filled with charcoal. The canister temporarily holds
the vapor in the charcoal. If ECM determines to draw the gathered vapor
into the combustion chambers during certain operating conditions, it
will vacuum into intake manifold.
Schematic Diagram
Canister
Canister is filled with charcoal and absorbs evaporated vapor
in fuel tank. The gathered fuel vapor in canister is drawn into the
intake manifold by the ECM/PCM when ...
See also:
Components and Components Location
Component Location
1. Cluster assembly2. Battery sensor3. Washer fluid level sensor4. Fuel gauge sender
...
Special Service Tools
Special Service Tools
Tool (Number and name)IllustrationUse09977-3R000Disc & hub assembly bolt removerRemoval and installation of disc & hub assembly bolt
...
Detecting sensor
The sensors are located inside of the rear bumper.
Always keep the rear bumper clean for the system to work properly. ...