Hyundai Equus: Damper Clutch Control Solenoid Valve Schematic Diagrams

Damper Clutch Control Solenoid Valve Specifications

Specifications Damper Clutch Control VFS x Control type : Normal low type Control Pressure kpa (kgf/cmx, psi)0~500.14 (0~5.1,0~72.54)Current value(mA)0~850 Internal resistance( ...

Damper Clutch Control Solenoid Valve Repair procedures

Inspection 1. Turn ignition switch OFF. 2. Disconnect the E Module connector. 3. Measure resistance between sensor signal terminal and sensor ground terminal. 4. Check that the resi ...

See also:

Rear Door Outside Handle Repair procedures
Replacement 1. Remove the hole plug (B). 2. After loosening the mounting bolt, then remove the rear door outside handle cover (A). Tightening torque : 6.9 ~ 10.8 N.m (0.7 ~ 1.1 kgf.m, 5.1 ...

Fuel Pressure Sensor (FPS) Specifications
Specification Pressure(kPa)Output Voltage(V)500.36002.511004.5 ...

Blind Spot Detection Switch Repair procedures
Removal 1. Disconnect the negative (-) battery. 2. Remove the crash pad lower panel (A). (Refer to Body - "Crash Pad Lower Panel") 3. Remove the crash pad lower panel and then push the bl ...