>
Check the pads for excessive wear, discs for run out and wear, and calipers for fluid leakage.
Rear Seat Assembly Repair procedures
Replacement
[Rear Seat Cushion Assembly]
1.
Pull it up and remove the rear seat cushion assembly (A).
2.
Install in the reverse order of removal.
•
Make sure the co ...
Troubleshooting
Troubleshooting
•
Check the fuel pressure after replacing parts.
(Refer to Fuel Delivery System - "Release Residual Pressure in Fuel Line")
...
Troubleshooting
Basic Troubleshooting
Basic Troubleshooting Guide
Customer Problem Analysis Sheet
Basic Inspection Procedure
Measuring Condition of Electronic Parts' Resistance
The measured resistance at high ...