>

Hyundai Equus: Vehicle weight - Driving your vehicle - Hyundai Equus 2009-2020 Owners ManualHyundai Equus: Vehicle weight

This section will guide you in the proper loading of your vehicle, to keep your loaded vehicle weight within its design rating capability.

Properly loading your vehicle will provide maximum return of the vehicle design performance. Before loading your vehicle, familiarize yourself with the following terms for determining your vehicle's weight ratings, from the vehicle's specifications and the certification label:

Certification label
The certification label is located on the driver's door sill at the center pillar. This label shows the maximum allowable weight of the fully loaded vehicle. This is called the GVWR (Gross ...

Base curb weight
This is the weight of the vehicle including a full tank of fuel and all standard equipment. It does not include passengers, cargo, or optional equipment. ...

See also:

35R Clutch Control Solenoid Valve(35R/C_VFS) Repair procedures
Inspection 1. Turn ignition switch OFF. 2. Disconnect the E Module connector. 3. Measure resistance between sensor signal terminal and sensor ground terminal. 4. Check that the res ...

Seat Belt Pretensioner (BPT) Repair procedures
Removal 1. Disconnect the battery negative cable, and wait for at least three minutes before beginning work. 2. Remove the safety belt (A) by turning it in the direction of arrow using a flat ...

Engine And Transmission Assembly Repair procedures
Removal     Х Use fender covers to avoid damaging painted surfaces. Х To avoid damage, unplug the wiring connectors carefully while holding the connector portion. ...

Categories

Hyundai Equus Manuals

© 2011-2020 Copyright www.heqmanual.com