>
To unlock:
1. Carry the Smart Key.
2. Either press the trunk handle button or press the Trunk Unlock button on the
Smart Key for more than one second.
3. The hazard warning lights will blink two times.
Once the trunk is opened and then closed, the trunk will lock automatically.
✽ NOTICE
The power trunk (if equipped) can be operated when the engine is not running. However, the power trunk consumes large amounts of vehicle electric power. To prevent the battery from being discharged, do not operate consecutively (more than approximately 10 times).
Filter replacement
It must be replaced when necessary, and should not be washed.
You can clean the filter when inspecting the air cleaner element. Clean the filter
by using compressed air.
Main air cleaner
1. ...
Low tire pressure position telltale
When the tire pressure monitoring system warning indicators are illuminated and
warning massage displayed on the cluster LCD display, one or more of your tires
is significantly under-inflated.
...
Presure Switch Repair procedures
Inspection
1.
Turn ignition switch OFF.
2.
Disconnect the E Module connector.
3.
Measure resistance between sensor signal terminal and sensor ground terminal.
4.
Check that the res ...