>
Line Pressure Control Solenoid Vale Repair procedures
Inspection
1.
Turn ignition switch OFF.
2.
Disconnect the E Module connector.
3.
Measure resistance between sensor signal terminal and sensor ground terminal.
4.
Check that the res ...
Specifications
Specification
ItemsBulb Wattage (W)FrontHead lamp (High)55Head lamp (Low)35 (HID) or LEDFront turn signal lampLEDFront fog lampLEDPosition lampLEDDoor mirrorLEDRearRear stop/tail lamp (Outside) L ...
Middle Speed Sensor Specifications
Specifications
x Type: Hall effect sensor
x Specifications
Operation condition (°C)°F ((-)40~150)) -40~302Air gap(mm)in.1.3(0.0512)Output voltage(V)High1.4Low0.7
...