>

Hyundai Equus: Starter Specifications - Starting System - Engine Electrical System - Hyundai Equus VI 2009-2024 Service ManualHyundai Equus: Starter Specifications

Specification
Item
Specification
Rated voltage
12 V, 1.7 kW
The number of pinion teeth
13
Performance
[No-load, 11.5 V]
Ampere
Max. 85 A
Speed
Min. 2,550 rpm

    Starter Description and Operation
    Description The starting system includes the battery, starter, solenoid switch, ignition switch, inhibitor switch (A/T), clutch pedal switch (M/T), ignition lock switch, connection wires and th ...

    Starter Components and Components Location
    Components 1. Front bracket2. Planet gear shaft assembly3. Lever4. Lever packing5. Magnet switch6. Through bolt7. Planet gear 8. Shield9. Armature assembly10. York assembly11. Brush holder assemb ...

    See also:

    Spliter Unit Repair procedures
    Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the floor console. (Refer to Body - "Floor Console Assembly") 3. Remove the spliter unit (A) after disconnecting the con ...

    Description and Operation
    Description Exhaust emissions (CO, HC, NOx) are controlled by a combination of engine modifications and the addition of special control components. Modifications to the combustion chamber, int ...

    Exhaust pipe and muffler
    Visually inspect the exhaust pipes, muffler and hangers for cracks, deterioration, or damage. Start the engine and listen carefully for any exhaust gas leakage. Tighten connections or replace part ...

    Categories

    Hyundai Equus Manuals


    © 2011-2024 Copyright www.heqmanual.com