>

Hyundai Equus: Special Service Tools - General Information - Engine Control/Fuel System - Hyundai Equus VI 2009-2026 Service ManualHyundai Equus: Special Service Tools

Special Service Tools
Item
Illustration
Application
Fuel Pressure Gauge
(09353-24100)

Measuring the fuel line pressure
Fuel Pressure Gauge Adapter
(09353-02100)

Connection between the high pressure fuel pump and the fuel feed line
Torque Wrench Socket (19mm)
(09314-3Q100)

Removal and installation of the high pressure fuel pipe
x SST No. 09314-27130 model also can be used for removing the high pressure fuel pipe.
Injector Combustion Seal Guide & Sizing tool
(09353-2B000)

Installation of the injector combustion seal

    Specifications
    Specifications Fuel Delivery System ItemsSpecificationFuel TankCapacity77 lit. (87.4 U.S.gal., 81.4 U.S.qt., 67.8 Imp.qt.)Fuel FilterTypePaper typeFuel PressureLow Pressure Fuel Line343.2 ~ 59 ...

    Troubleshooting
    Basic Troubleshooting Basic Troubleshooting Guide Customer Problem Analysis Sheet Basic Inspection Procedure Measuring Condition of Electronic Parts' Resistance The measured resistance at high ...

    See also:

    Cool and Warm Box Components and Components Location
    Component Location 1. Cool & Warm Box Bracket2. Wire Harness3. Front Duct4. Cool & Warm Box Assembly5. Wire Harness6. Cool & Warm Box Partition7. Circuit Board Cover8. Circuit Board9. ...

    Filler-Neck Assembly Repair procedures
    Removal 1. Disconnect the fuel filler hose (A) and the leveling hose (B). 2. Disconnect the vapor hose quick-connector (A) after removing the trunk luggage trim. 3. Remove the rear-LH whee ...

    Repair procedures
    Removal 1. Remove the steering column upper and lower shrouds after loosening screws. 2. Disconnect the multifunction switch connector (A). 3. Remove the wiper & washer switch (A) by p ...

    Categories

    Hyundai Equus Manuals

    © 2011-2026 Copyright www.heqmanual.com