>

Hyundai Equus: Purge Control Solenoid Valve (PCSV) Specifications - Engine Control System - Engine Control/Fuel System - Hyundai Equus VI 2009-2021 Service ManualHyundai Equus: Purge Control Solenoid Valve (PCSV) Specifications

Specification
Item
Specification
Coil Resistance (x)
14.0 ~ 18.0 [20°C(68°F)]

    Purge Control Solenoid Valve (PCSV) Description and Operation
    Description Purge Control Solenoid Valve (PCSV) is installed on the surge tank and controls the passage between the canister and the intake manifold. It is a solenoid valve and is open when the ...

    Purge Control Solenoid Valve (PCSV) Schematic Diagrams
    Circuit Diagram ...

    See also:

    Fuel Pump Motor Components and Components Location
    Components Pin NO.ItemDescription1Upper body3-phase coil power supply, fuel delivery, and sealing2Stator assemblyCreates an N pole and S pole flux to induce the rotor to turn.3rotor assemblyTorqu ...

    Rear Wheel Speed Sensor Repair procedures
    Removal 1. Remove the rear wheel speed sensor mounting bolt. Tightening torque: 6.9 ~ 10.8 Nm (0.7 ~ 1.1 kgf.m, 5.1~ 8.0 lb-ft) 2. Remove the rear wheel guard. 3. Disconnect the rea ...

    Highway driving
    Tires Adjust the tire inflation pressures to specification. Low tire inflation pressures will result in overheating and possible failure of the tires. Avoid using worn or damaged tires which m ...

    Categories

    Hyundai Equus Manuals

    © 2011-2021 Copyright www.heqmanual.com