>
To open:
1. Make sure the shift lever is in P(Park).
2. Then do one of the following :
- Press the Smart Key Trunk Unlock button for more than one second.
- Press the button on the trunk itself with the Smart Key in your possession.
- Use the mechanical key.
- Use the trunk release button.
3. Lift the trunk lid up.
To close:
Lower the trunk lid and press down until it locks.
WARNING
Always keep the trunk lid completely closed while the vehicle is in motion. If it is left open or ajar, poisonous exhaust gases containing carbon monoxide (CO) may enter the vehicle and serious illness or death may result.
WARNING
The trunk swings upward. Make sure no objects or people are near the rear of the vehicle when opening the trunk.
CAUTION
To prevent damage to the trunk lift cylinders and the attached hardware, always close the trunk before driving.
✽ NOTICE
In cold and wet climates, trunk lock and trunk mechanisms may not work properly due to freezing conditions.
Unlocking
To unlock:
1. Carry the Smart Key.
2. Either put your hand in the driver’s outside door handle or press the Door Unlock
button on the Smart Key.
3. The driver’s door will unlock. The hazard w ...
Erasing HomeLink® buttons
Individual buttons cannot be erased. However, to erase all three programmed buttons:
1. Press and hold the two outer HomeLink® buttons until the indicator light begins
to flash after 10 seconds.
2 ...
Transmission Oil Temperature Sensor Specifications
Specifications
x Type: Negative Thermal Coefficient Type
Temp.[(°C)°F]Resistance (kx)(-40)-40139.5(-20)-4.047.4(0)32.018.6(20)68.08.1(40)104.03.8(60)140.01.98(80)176.01.08(100)212.00.63(120)248 ...