>
Check the fuel lines, fuel hoses and connections for leakage and damage. Have an authorized EQUUS dealer replace any damaged or leaking parts immediately.
Crankshaft Position Sensor (CKPS) Repair procedures
Inspection
1.
Check signal waveform of CKPS and CMPS using a GDS.
Specification: Refer to “Waveform”
Removal
1.
Turn the ignition switch OFF and disconnect the battery negative (-) cab ...
Blower Motor Repair procedures
Inspection
1.
Connect the battery voltage and check the blower motor rotation.
2.
If the blower motor does not operate well, substitute with a known-good blower motor and check for proper oper ...
Blind Spot Detection Unit Schematic Diagrams
Circuit Diagram
...