Hyundai Equus: Hood Latch Release Handle Components and Components Location

Hood Weatherstrip Repair procedures

Replacement 1. Remove the glue on end of both sides before removing the hood weatherstrip (A).     • Be careful not to scratch the hood weatherstrip. 2. Installat ...

Hood Latch Release Handle Repair procedures

Replacement 1. After loosening the mounting screw, then remove the hood latch release handle (A). 2. Installation is the reverse of removal.     • Make sure the hood la ...

See also:

Components and Components Location
Component Location (1) 1. Buzzer2. RF receiver3. Smart key unit4. Interior antenna 35. Interior antenna 16. Interior antenna 27. Trunk antenna8. Bumper antenna Component Location (2) 1. Doo ...

Start-Up
You can start the engine without inserting the key. For detailed information refer to the Engine Start/Stop Button in section 5. CAUTION To prevent damaging the Smart Key : Keep the Smart Key ...

Repair procedures
Inspection 1. After disconnecting the vapor hose from the PCV valve, remove the PCV valve. 2. Reconnect the PCV valve to the vapor hose. 3. Run the engine at idle, and put a finger on t ...