>

Hyundai Equus: Hood Seal Weatherstrip Repair procedures - Hood - Body (Interior and Exterior) - Hyundai Equus VI 2009-2026 Service ManualHyundai Equus: Hood Seal Weatherstrip Repair procedures

Replacement
1.
Detach the clips, then remove the hood seal weatherstrip (A).
   
•
Be careful not to scratch the hood seal weatherstrip.

2.
Installation is the reverse of removal.
   
•
Replace any damaged clips.
    Hood Insulator Pad Repair procedures
    Replacement 1. Using a clip remover, detach the clips, and remove the hood insulator pad (A).     • Be careful not to scratch the hood panel. 2. Installation is th ...

    Hood Weatherstrip Repair procedures
    Replacement 1. Remove the glue on end of both sides before removing the hood weatherstrip (A).     • Be careful not to scratch the hood weatherstrip. 2. Installat ...

    See also:

    Water pump Components and Components Location
    Components 1. Drive belt2. Drive belt tensioner3. Drive belt idler4. Water pump pulley5. Water pump6. Water pump gasket ...

    Valve Body Description and Operation
    Description The valve body is essential to automatic transmission control and consists of various valves used to control the oil feed from the oil pump. Specifically, these valves consist of pr ...

    Spliter Unit Repair procedures
    Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the floor console. (Refer to Body - "Floor Console Assembly") 3. Remove the spliter unit (A) after disconnecting the con ...

    Categories

    Hyundai Equus Manuals

    © 2011-2026 Copyright www.heqmanual.com