Hyundai Equus: Limousine Side Body
Second generation VI (2009–2024) / Hyundai Equus VI 2009-2024 Service Manual / Body (Interior and Exterior) / Body Dimensions / Limousine Side Body
Second generation VI (2009–2024) / Hyundai Equus VI 2009-2024 Service Manual / Body (Interior and Exterior) / Body Dimensions / Limousine Side Body
| Side body A |
|
|
|
| Front side member tooling hole (O8) | Fender apron panel tooling hole (O7) | Front door hinge upper mounting hole (O13) |
|
|
|
| Front door hinge lower mounting hole (O13) | Fender mounting hole (O6.6) | Rear door hinge upper mounting hole (O13) |
| ||
| Rear door hinge lower mounting hole (O13) |
| Side body B |
|
|
|
| Side outer panel notch | Side outer panel notch | Side outer panel notch |
|
|
|
| Side outer panel notch | Side outer panel notch | Front door switch mounting hole (O10) |
| Side body C |
|
|
|
| Rear door hinge upper mounting hole (O13) | Rear door hinge lower mounting hole (O13) | Quarter fixed glass mounting hole (O8) |
|
|
|
| Rear door switch mounting hole (O8) | Side sill moulding mounting hole (10X10) | Rear bumper mounting hole (O11) |
| Side body D |
|
|
|
| Side outer panel notch | Side outer panel notch | Side outer panel notch |
|
|
|
| Side outer panel notch | Quarter fixed glass mounting hole (O8) | Rear door switch mounting hole (O8) |
Limousine Front Body
Front body A
Roof panel front cornerFront pillar outer cornerHood hinge mounting hole (O13)Shockabsorber mounting hole (O24)Front end module mounting hole (O9)Cowl top cover mounting hole (O7)
F ...
Limousine Interior
Interior A
Front inner pillar tooling hole (O9)Cowl cross bar mounting hole (O11)Front door checker mounting hole (O11)Side sill inner reinforcement tooling hole (O7)Seat belt height adjuster upp ...
See also:
Driver Airbag (DAB) Module and Clock Spring Repair procedures
Removal
1.
Disconnect the battery negative cable and wait for at least three minutes before beginning work.
2.
Loosen the airbag module mounting bolts (2EA).
3.
Remove the wiring fixing c ...
Temperature Control Actuator Repair procedures
Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the temperature control actuator connector.
3.
Verify that the temperature control actuator operates to the
warm (Driver's side) ...
Middle Speed Sensor Specifications
Specifications
x Type: Hall effect sensor
x Specifications
Operation condition (°C)°F ((-)40~150)) -40~302Air gap(mm)in.1.3(0.0512)Output voltage(V)High1.4Low0.7
...
Categories
Hyundai Equus Manuals
© 2011-2024 Copyright www.heqmanual.com