>

Hyundai Equus: Front Disc Brake Components and Components Location - Brake System - Brake System - Hyundai Equus VI 2009-2026 Service ManualHyundai Equus: Front Disc Brake Components and Components Location

Components

1. Caliper body
2. Guide pin
3. Locking pin
4. Brake pad
5. Pad shim
6. Retraction spring
7. Bleed screw

    Brake Pedal Repair procedures
    Removal 1. Remove the lower crash pad. (Refer to Body - "Crash Pad") 2. Disconnect the stop lamp switch connector (A). 3. Remove the mounting bracket nut (B). Tightening torque : 14. ...

    Front Disc Brake Repair procedures
    Removal 1. Remove the front wheel & tire. Tightening torque : 88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft) 2. Remove the brake hose mounting bracket. (Knuckle mounting pa ...

    See also:

    Maintenance under severe usage conditions
    The following items must be serviced more frequently on cars normally used under severe driving conditions. Refer to the chart below for the appropriate maintenance intervals. R : Replace I : I ...

    Accelerator Position Sensor (APS) Repair procedures
    Inspection 1. Connect a scantool on the Data Link Connector (DLC). 2. Turn the ignition switch ON. 3. Measure the output voltage of the APS 1 and 2 at C.T and W.O.T. Specification: Refe ...

    Specifications
    Specifications Front air strut ItemsSpecificationAir spring volume at design position1.78xMaximum other bellow diameter118 mmBurst pressure31.5 barMinimum operating temperature-40°CMaximum operat ...

    Categories

    Hyundai Equus Manuals

    © 2011-2026 Copyright www.heqmanual.com