Hyundai Equus: Side Airbag (SAB) Module Description and Operation
Second generation VI (2009–2026) / Hyundai Equus VI 2009-2026 Service Manual / Restraint / Airbag Module / Side Airbag (SAB) Module Description and Operation
Second generation VI (2009–2026) / Hyundai Equus VI 2009-2026 Service Manual / Restraint / Airbag Module / Side Airbag (SAB) Module Description and Operation
| Description |
The Side Airbags (SAB) are installed inside the front seat
and protects the driver and passenger from danger when a side crash
occurs. The SRSCM determines deployment of the side airbag by using the
Side Impact Sensor (SIS) signal.
Never attempt to measure the circuit resistance of the airbag
module (squib) even if you are using a specified tester. If the circuit
resistance is measured with a tester, accidental airbag deployment will
result in serious personal injury. |
Passenger Airbag (PAB) Module Repair procedures
Removal
1.
Disconnect the battery negative cable and wait for at least three minutes before beginning work.
2.
Remove the glove box housing.
(Refer to Body - "Glove Box Housing")
3.
Disc ...
Side Airbag (SAB) Module Components and Components Location
Components
...
See also:
Wheel alignment and tire balance
The wheels on your vehicle were aligned and balanced carefully at the factory
to give you the longest tire life and best overall performance.
In most cases, you will not need to have your wheels al ...
Rear LCD monitor Components and Components Location
Components
...
Rail Pressure Sensor (RPS) Troubleshooting
Signal Waveform
...
Categories
Hyundai Equus Manuals
© 2011-2026 Copyright www.heqmanual.com