>

Hyundai Equus: Rear Variable Damper Schematic Diagrams - Air Suspension System - Suspension System - Hyundai Equus VI 2009-2026 Service ManualHyundai Equus: Rear Variable Damper Schematic Diagrams

Circuit Diagram
1.
Rear variable damper connector

2.
Rear variable damper terminal function
Terminal
Function
1
Variable damper (-)
2
Variable damper (+)

3.
Circuit diagram

    Rear Variable Damper Description and Operation
    Description The rear variable damper consists of a damper and an upper mounting bracket. This damper determines vehicle behavior through the acceleration sensor in the ECS ECU, and it adjusts ...

    Rear Variable Damper Repair procedures
    Removal 1. Remove the rear wheel & tire. Tightening torque : 90.0 ~ 110.0 N.m(9.0 ~ 11.0 kgf.m, 65.0 ~ 80.0 lb-ft) 2. Disconnect the rear shock absorber (A) from the rear axle by loo ...

    See also:

    6 Speed Clutch Control Solenoid Valve Description and Operation
    Description 6 Clutch control solenoid valve is attached to the valve body. This variable force solenoid valve directly controls the hydraulic pressure inside the 6 Clutch. ...

    Description and Operation
    Description Emissions Control System consists of three major systems. • Crankcase Emission Control System prevents blow-by gas from releasing into the atmosphere. This system recycles gas ...

    Power outlet
    The power outlet is designed to provide power for mobile telephones or other devices designed to operate with vehicle electrical systems. The devices should draw less than 10 amps with the engin ...

    Categories

    Hyundai Equus Manuals

    © 2011-2026 Copyright www.heqmanual.com