>

Hyundai Equus: ON/OFF Solenoid Valve Specifications - Automatic Transmission Control System - Automatic Transmission System (SBC) - Hyundai Equus VI 2009-2026 Service ManualHyundai Equus: ON/OFF Solenoid Valve Specifications

Specifications
ON/OFF Solenoid Valve
x Control type : Normal low type
Control pressure kpa (kgf/cmx, psi)
539.36
(5.5, 78.23)
 Internal resistance(x)
10~11

    ON/OFF Solenoid Valve Description and Operation
    Description ON/OFF solenoid valve is attached to the valve body and is an on/off solenoid valve that is used to change gears. ...

    ON/OFF Solenoid Valve Schematic Diagrams
    Circuit Diagram ...

    See also:

    Good driving practices
    Never move the gear shift lever from P (Park) or N (Neutral) to any other position with the accelerator pedal depressed. Never move the gear shift lever into P (Park) when the vehicle is in mo ...

    Recommended SAE viscosity number
    CAUTION Always be sure to clean the area around any filler plug, drain plug, or dipstick before checking or draining any lubricant. This is especially important in dusty or sandy areas and when t ...

    Electronic Active Headrest Description and Operation
    Description The electronic active headrest is designed to trigger the headrest forward and upward when impact sensor detects a rear (or front) impact. This helps to prevent the driver's and fr ...

    Categories

    Hyundai Equus Manuals

    © 2011-2026 Copyright www.heqmanual.com